From c51a618278886b38bffa8baffb59802993a9cd61 Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Thu, 25 Jan 2007 16:27:44 -0800 Subject: [PATCH] ARM: OMAP: Add clocksource driver for OMAP This is an update of http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=3876/1 from Daniel Walker and Kevin Hilman. Changes from Dirk Behme: - Apply cleanly to recent git (pt_regs change) - Move clocksource init to extra function. Can be called later by clocksource subsystem - Remove warning: 'omap_32k_timer_handler' defined but not used when CONFIG_NO_IDLE_HZ isn't set. - Minor cleanups Changes from David Brownell: - OMAP1, OMAP2: 32k clocksource is always available on 16xx and 24xx - OMAP1 MPU timer: * consult clock framework to determine xtal clock * bugfix sched_clock() low order bits * cleanup - Kconfig updates Note that "MPU timer" still doesn't have lost tick support. Signed-off-by: David Brownell Signed-off-by: Dirk Behme Signed-off-by: Tony Lindgren --- arch/arm/Kconfig | 1 + arch/arm/mach-omap1/time.c | 142 ++++++++++++++++++++-------------------- arch/arm/plat-omap/common.c | 50 ++++++++++++++ arch/arm/plat-omap/timer32k.c | 44 +++++-------- 4 files changed, 139 insertions(+), 98 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5c79519..5c7eec0 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -341,6 +341,7 @@ config ARCH_LH7A40X config ARCH_OMAP bool "TI OMAP" + select GENERIC_TIME help Support for TI's OMAP platform (OMAP1 and OMAP2). diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index 1b7e4a5..a7e6cde 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -39,6 +39,9 @@ #include #include #include +#include +#include +#include #include #include @@ -48,13 +51,7 @@ #include #include -struct sys_timer omap_timer; -/* - * --------------------------------------------------------------------------- - * MPU timer - * --------------------------------------------------------------------------- - */ #define OMAP_MPU_TIMER_BASE OMAP_MPU_TIMER1_BASE #define OMAP_MPU_TIMER_OFFSET 0x100 @@ -88,21 +85,6 @@ static inline unsigned long long cycles_2_ns(unsigned long long cyc) return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR; } -/* - * MPU_TICKS_PER_SEC must be an even number, otherwise machinecycles_to_usecs - * will break. On P2, the timer count rate is 6.5 MHz after programming PTV - * with 0. This divides the 13MHz input by 2, and is undocumented. - */ -#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE) -/* REVISIT: This ifdef construct should be replaced by a query to clock - * framework to see if timer base frequency is 12.0, 13.0 or 19.2 MHz. - */ -#define MPU_TICKS_PER_SEC (13000000 / 2) -#else -#define MPU_TICKS_PER_SEC (12000000 / 2) -#endif - -#define MPU_TIMER_TICK_PERIOD ((MPU_TICKS_PER_SEC / HZ) - 1) typedef struct { u32 cntl; /* CNTL_TIMER, R/W */ @@ -131,87 +113,94 @@ static inline void omap_mpu_timer_start(int nr, unsigned long load_val) timer->cntl = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_AR | MPU_TIMER_ST); } -unsigned long omap_mpu_timer_ticks_to_usecs(unsigned long nr_ticks) +/* + * --------------------------------------------------------------------------- + * MPU timer 1 ... count down to zero, interrupt, reload + * --------------------------------------------------------------------------- + */ +static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id) { - unsigned long long nsec; + write_seqlock(&xtime_lock); + /* NOTE: no lost-tick detection/handling! */ + timer_tick(); + write_sequnlock(&xtime_lock); - nsec = cycles_2_ns((unsigned long long)nr_ticks); - return (unsigned long)nsec / 1000; + return IRQ_HANDLED; } -/* - * Last processed system timer interrupt - */ -static unsigned long omap_mpu_timer_last = 0; +static struct irqaction omap_mpu_timer1_irq = { + .name = "mpu_timer1", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = omap_mpu_timer1_interrupt, +}; -/* - * Returns elapsed usecs since last system timer interrupt - */ -static unsigned long omap_mpu_timer_gettimeoffset(void) +static __init void omap_init_mpu_timer(unsigned long rate) { - unsigned long now = 0 - omap_mpu_timer_read(0); - unsigned long elapsed = now - omap_mpu_timer_last; + set_cyc2ns_scale(rate / 1000); - return omap_mpu_timer_ticks_to_usecs(elapsed); + setup_irq(INT_TIMER1, &omap_mpu_timer1_irq); + omap_mpu_timer_start(0, (rate / HZ) - 1); } /* - * Elapsed time between interrupts is calculated using timer0. - * Latency during the interrupt is calculated using timer1. - * Both timer0 and timer1 are counting at 6MHz (P2 6.5MHz). + * --------------------------------------------------------------------------- + * MPU timer 2 ... free running 32-bit clock source and scheduler clock + * --------------------------------------------------------------------------- */ -static irqreturn_t omap_mpu_timer_interrupt(int irq, void *dev_id) -{ - unsigned long now, latency; - write_seqlock(&xtime_lock); - now = 0 - omap_mpu_timer_read(0); - latency = MPU_TICKS_PER_SEC / HZ - omap_mpu_timer_read(1); - omap_mpu_timer_last = now - latency; - timer_tick(); - write_sequnlock(&xtime_lock); +static unsigned long omap_mpu_timer2_overflows; +static irqreturn_t omap_mpu_timer2_interrupt(int irq, void *dev_id) +{ + omap_mpu_timer2_overflows++; return IRQ_HANDLED; } -static struct irqaction omap_mpu_timer_irq = { - .name = "mpu timer", - .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = omap_mpu_timer_interrupt, +static struct irqaction omap_mpu_timer2_irq = { + .name = "mpu_timer2", + .flags = IRQF_DISABLED, + .handler = omap_mpu_timer2_interrupt, }; -static unsigned long omap_mpu_timer1_overflows; -static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id) +static cycle_t mpu_read(void) { - omap_mpu_timer1_overflows++; - return IRQ_HANDLED; + return ~omap_mpu_timer_read(1); } -static struct irqaction omap_mpu_timer1_irq = { - .name = "mpu timer1 overflow", - .flags = IRQF_DISABLED, - .handler = omap_mpu_timer1_interrupt, +static struct clocksource clocksource_mpu = { + .name = "mpu_timer2", + .rating = 300, + .read = mpu_read, + .mask = CLOCKSOURCE_MASK(32), + .shift = 24, + .is_continuous = 1, }; -static __init void omap_init_mpu_timer(void) +static void __init omap_init_clocksource(unsigned long rate) { - set_cyc2ns_scale(MPU_TICKS_PER_SEC / 1000); - omap_timer.offset = omap_mpu_timer_gettimeoffset; - setup_irq(INT_TIMER1, &omap_mpu_timer1_irq); - setup_irq(INT_TIMER2, &omap_mpu_timer_irq); - omap_mpu_timer_start(0, 0xffffffff); - omap_mpu_timer_start(1, MPU_TIMER_TICK_PERIOD); + static char err[] __initdata = KERN_ERR + "%s: can't register clocksource!\n"; + + clocksource_mpu.mult + = clocksource_khz2mult(rate/1000, clocksource_mpu.shift); + + setup_irq(INT_TIMER2, &omap_mpu_timer2_irq); + omap_mpu_timer_start(1, ~0); + + if (clocksource_register(&clocksource_mpu)) + printk(err, clocksource_mpu.name); } + /* * Scheduler clock - returns current time in nanosec units. */ unsigned long long sched_clock(void) { - unsigned long ticks = 0 - omap_mpu_timer_read(0); + unsigned long ticks = 0 - omap_mpu_timer_read(1); unsigned long long ticks64; - ticks64 = omap_mpu_timer1_overflows; + ticks64 = omap_mpu_timer2_overflows; ticks64 <<= 32; ticks64 |= ticks; @@ -225,10 +214,21 @@ unsigned long long sched_clock(void) */ static void __init omap_timer_init(void) { - omap_init_mpu_timer(); + struct clk *ck_ref = clk_get(NULL, "ck_ref"); + unsigned long rate; + + BUG_ON(IS_ERR(ck_ref)); + + rate = clk_get_rate(ck_ref); + clk_put(ck_ref); + + /* PTV = 0 */ + rate /= 2; + + omap_init_mpu_timer(rate); + omap_init_clocksource(rate); } struct sys_timer omap_timer = { .init = omap_timer_init, - .offset = NULL, /* Initialized later */ }; diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index ffb94aa..3386255 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -160,3 +160,53 @@ static int __init omap_add_serial_console(void) return add_preferred_console("ttyS", line, opt); } console_initcall(omap_add_serial_console); + + +/* + * 32KHz clocksource ... always available, on pretty most chips except + * OMAP 730 and 1510. Other timers could be used as clocksources, with + * higher resolution in free-running counter modes (e.g. 12 MHz xtal), + * but systems won't necessarily want to spend resources that way. + */ + +#if defined(CONFIG_ARCH_OMAP16XX) +#define TIMER_32K_SYNCHRONIZED 0xfffbc410 +#elif defined(CONFIG_ARCH_OMAP24XX) +#define TIMER_32K_SYNCHRONIZED 0x48004010 +#endif + +#ifdef TIMER_32K_SYNCHRONIZED + +#include + +static cycle_t omap_32k_read(void) +{ + return omap_readl(TIMER_32K_SYNCHRONIZED); +} + +static struct clocksource clocksource_32k = { + .name = "32k_counter", + .rating = 250, + .read = omap_32k_read, + .mask = CLOCKSOURCE_MASK(32), + .shift = 10, + .is_continuous = 1, +}; + +static int __init omap_init_clocksource_32k(void) +{ + static char err[] __initdata = KERN_ERR + "%s: can't register clocksource!\n"; + + if (cpu_is_omap16xx() || cpu_is_omap24xx()) { + clocksource_32k.mult = clocksource_hz2mult(32768, + clocksource_32k.shift); + + if (clocksource_register(&clocksource_32k)) + printk(err, clocksource_32k.name); + } + return 0; +} +arch_initcall(omap_init_clocksource_32k); + +#endif /* TIMER_32K_SYNCHRONIZED */ diff --git a/arch/arm/plat-omap/timer32k.c b/arch/arm/plat-omap/timer32k.c index a98de90..38b7b91 100644 --- a/arch/arm/plat-omap/timer32k.c +++ b/arch/arm/plat-omap/timer32k.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include @@ -171,15 +172,6 @@ omap_32k_ticks_to_nsecs(unsigned long ticks_32k) static unsigned long omap_32k_last_tick = 0; /* - * Returns elapsed usecs since last 32k timer interrupt - */ -static unsigned long omap_32k_timer_gettimeoffset(void) -{ - unsigned long now = omap_32k_sync_timer_read(); - return omap_32k_ticks_to_usecs(now - omap_32k_last_tick); -} - -/* * Returns current time from boot in nsecs. It's OK for this to wrap * around for now, as it's just a relative time stamp. */ @@ -229,22 +221,6 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id) } #ifdef CONFIG_NO_IDLE_HZ -static irqreturn_t omap_32k_timer_handler(int irq, void *dev_id) -{ - unsigned long now; - - now = omap_32k_sync_timer_read(); - - /* Don't bother reprogramming timer if last tick was before next - * jiffie. We will get another interrupt when previously programmed - * timer expires. This cuts down interrupt load quite a bit. - */ - if (now - omap_32k_last_tick < OMAP_32K_TICKS_PER_HZ) - return IRQ_HANDLED; - - return _omap_32k_timer_interrupt(irq, dev_id); -} - /* * Programs the next timer interrupt needed. Called when dynamic tick is * enabled, and to reprogram the ticks to skip from pm_idle. Note that @@ -280,6 +256,22 @@ static int omap_32k_timer_disable_dyn_tick(void) return 0; } +static irqreturn_t omap_32k_timer_handler(int irq, void *dev_id) +{ + unsigned long now; + + now = omap_32k_sync_timer_read(); + + /* Don't bother reprogramming timer if last tick was before next + * jiffie. We will get another interrupt when previously programmed + * timer expires. This cuts down interrupt load quite a bit. + */ + if (now - omap_32k_last_tick < OMAP_32K_TICKS_PER_HZ) + return IRQ_HANDLED; + + return _omap_32k_timer_interrupt(irq, dev_id); +} + static struct dyn_tick_timer omap_dyn_tick_timer = { .enable = omap_32k_timer_enable_dyn_tick, .disable = omap_32k_timer_disable_dyn_tick, @@ -302,7 +294,6 @@ static __init void omap_init_32k_timer(void) if (cpu_class_is_omap1()) setup_irq(INT_OS_TIMER, &omap_32k_timer_irq); - omap_timer.offset = omap_32k_timer_gettimeoffset; omap_32k_last_tick = omap_32k_sync_timer_read(); #ifdef CONFIG_ARCH_OMAP2 @@ -337,5 +328,4 @@ static void __init omap_timer_init(void) struct sys_timer omap_timer = { .init = omap_timer_init, - .offset = NULL, /* Initialized later */ }; -- 1.4.4.2